添加项目文件。

.gitattributes

@@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following 
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+
+###############################################################################
+# diff behavior for common document formats
+# 
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the 
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain

.gitignore

@@ -0,0 +1,261 @@
+## Ignore Visual Studio temporary files, build results, and
+## files generated by popular Visual Studio add-ons.
+
+# User-specific files
+*.suo
+*.user
+*.userosscache
+*.sln.docstates
+
+# User-specific files (MonoDevelop/Xamarin Studio)
+*.userprefs
+
+# Build results
+[Dd]ebug/
+[Dd]ebugPublic/
+[Rr]elease/
+[Rr]eleases/
+x64/
+x86/
+bld/
+[Bb]in/
+[Oo]bj/
+[Ll]og/
+
+# Visual Studio 2015 cache/options directory
+.vs/
+# Uncomment if you have tasks that create the project's static files in wwwroot
+#wwwroot/
+
+# MSTest test Results
+[Tt]est[Rr]esult*/
+[Bb]uild[Ll]og.*
+
+# NUNIT
+*.VisualState.xml
+TestResult.xml
+
+# Build Results of an ATL Project
+[Dd]ebugPS/
+[Rr]eleasePS/
+dlldata.c
+
+# DNX
+project.lock.json
+project.fragment.lock.json
+artifacts/
+
+*_i.c
+*_p.c
+*_i.h
+*.ilk
+*.meta
+*.obj
+*.pch
+*.pdb
+*.pgc
+*.pgd
+*.rsp
+*.sbr
+*.tlb
+*.tli
+*.tlh
+*.tmp
+*.tmp_proj
+*.log
+*.vspscc
+*.vssscc
+.builds
+*.pidb
+*.svclog
+*.scc
+
+# Chutzpah Test files
+_Chutzpah*
+
+# Visual C++ cache files
+ipch/
+*.aps
+*.ncb
+*.opendb
+*.opensdf
+*.sdf
+*.cachefile
+*.VC.db
+*.VC.VC.opendb
+
+# Visual Studio profiler
+*.psess
+*.vsp
+*.vspx
+*.sap
+
+# TFS 2012 Local Workspace
+$tf/
+
+# Guidance Automation Toolkit
+*.gpState
+
+# ReSharper is a .NET coding add-in
+_ReSharper*/
+*.[Rr]e[Ss]harper
+*.DotSettings.user
+
+# JustCode is a .NET coding add-in
+.JustCode
+
+# TeamCity is a build add-in
+_TeamCity*
+
+# DotCover is a Code Coverage Tool
+*.dotCover
+
+# NCrunch
+_NCrunch_*
+.*crunch*.local.xml
+nCrunchTemp_*
+
+# MightyMoose
+*.mm.*
+AutoTest.Net/
+
+# Web workbench (sass)
+.sass-cache/
+
+# Installshield output folder
+[Ee]xpress/
+
+# DocProject is a documentation generator add-in
+DocProject/buildhelp/
+DocProject/Help/*.HxT
+DocProject/Help/*.HxC
+DocProject/Help/*.hhc
+DocProject/Help/*.hhk
+DocProject/Help/*.hhp
+DocProject/Help/Html2
+DocProject/Help/html
+
+# Click-Once directory
+publish/
+
+# Publish Web Output
+*.[Pp]ublish.xml
+*.azurePubxml
+# TODO: Comment the next line if you want to checkin your web deploy settings
+# but database connection strings (with potential passwords) will be unencrypted
+#*.pubxml
+*.publishproj
+
+# Microsoft Azure Web App publish settings. Comment the next line if you want to
+# checkin your Azure Web App publish settings, but sensitive information contained
+# in these scripts will be unencrypted
+PublishScripts/
+
+# NuGet Packages
+*.nupkg
+# The packages folder can be ignored because of Package Restore
+**/packages/*
+# except build/, which is used as an MSBuild target.
+!**/packages/build/
+# Uncomment if necessary however generally it will be regenerated when needed
+#!**/packages/repositories.config
+# NuGet v3's project.json files produces more ignoreable files
+*.nuget.props
+*.nuget.targets
+
+# Microsoft Azure Build Output
+csx/
+*.build.csdef
+
+# Microsoft Azure Emulator
+ecf/
+rcf/
+
+# Windows Store app package directories and files
+AppPackages/
+BundleArtifacts/
+Package.StoreAssociation.xml
+_pkginfo.txt
+
+# Visual Studio cache files
+# files ending in .cache can be ignored
+*.[Cc]ache
+# but keep track of directories ending in .cache
+!*.[Cc]ache/
+
+# Others
+ClientBin/
+~$*
+*~
+*.dbmdl
+*.dbproj.schemaview
+*.jfm
+*.pfx
+*.publishsettings
+node_modules/
+orleans.codegen.cs
+
+# Since there are multiple workflows, uncomment next line to ignore bower_components
+# (https://github.com/github/gitignore/pull/1529#issuecomment-104372622)
+#bower_components/
+
+# RIA/Silverlight projects
+Generated_Code/
+
+# Backup & report files from converting an old project file
+# to a newer Visual Studio version. Backup files are not needed,
+# because we have git ;-)
+_UpgradeReport_Files/
+Backup*/
+UpgradeLog*.XML
+UpgradeLog*.htm
+
+# SQL Server files
+*.mdf
+*.ldf
+
+# Business Intelligence projects
+*.rdl.data
+*.bim.layout
+*.bim_*.settings
+
+# Microsoft Fakes
+FakesAssemblies/
+
+# GhostDoc plugin setting file
+*.GhostDoc.xml
+
+# Node.js Tools for Visual Studio
+.ntvs_analysis.dat
+
+# Visual Studio 6 build log
+*.plg
+
+# Visual Studio 6 workspace options file
+*.opt
+
+# Visual Studio LightSwitch build output
+**/*.HTMLClient/GeneratedArtifacts
+**/*.DesktopClient/GeneratedArtifacts
+**/*.DesktopClient/ModelManifest.xml
+**/*.Server/GeneratedArtifacts
+**/*.Server/ModelManifest.xml
+_Pvt_Extensions
+
+# Paket dependency manager
+.paket/paket.exe
+paket-files/
+
+# FAKE - F# Make
+.fake/
+
+# JetBrains Rider
+.idea/
+*.sln.iml
+
+# CodeRush
+.cr/
+
+# Python Tools for Visual Studio (PTVS)
+__pycache__/
+*.pyc

Log-Function-Class.sln

@@ -0,0 +1,25 @@
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio 15
+VisualStudioVersion = 15.0.33026.149
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "Log-Function-Class", "Log-Function-Class\Log-Function-Class.csproj", "{EBDDBAFA-AF32-421A-8A78-197C2AE09C79}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Any CPU = Debug|Any CPU
+		Release|Any CPU = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{EBDDBAFA-AF32-421A-8A78-197C2AE09C79}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{EBDDBAFA-AF32-421A-8A78-197C2AE09C79}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{EBDDBAFA-AF32-421A-8A78-197C2AE09C79}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{EBDDBAFA-AF32-421A-8A78-197C2AE09C79}.Release|Any CPU.Build.0 = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+		SolutionGuid = {DAA2100A-BF21-4226-8440-DD5319D0841A}
+	EndGlobalSection
+EndGlobal

Log-Function-Class/App.config

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8" ?>
+<configuration>
+    <startup> 
+        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.8" />
+    </startup>
+</configuration>

Log-Function-Class/Log-Function-Class.csproj

@@ -0,0 +1,54 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ProjectGuid>{EBDDBAFA-AF32-421A-8A78-197C2AE09C79}</ProjectGuid>
+    <OutputType>Exe</OutputType>
+    <RootNamespace>Log_Function_Class</RootNamespace>
+    <AssemblyName>Log-Function-Class</AssemblyName>
+    <TargetFrameworkVersion>v4.8</TargetFrameworkVersion>
+    <FileAlignment>512</FileAlignment>
+    <AutoGenerateBindingRedirects>true</AutoGenerateBindingRedirects>
+    <Deterministic>true</Deterministic>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <PlatformTarget>AnyCPU</PlatformTarget>
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <Optimize>false</Optimize>
+    <OutputPath>bin\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <PlatformTarget>AnyCPU</PlatformTarget>
+    <DebugType>pdbonly</DebugType>
+    <Optimize>true</Optimize>
+    <OutputPath>bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="System" />
+    <Reference Include="System.Core" />
+    <Reference Include="System.Xml.Linq" />
+    <Reference Include="System.Data.DataSetExtensions" />
+    <Reference Include="Microsoft.CSharp" />
+    <Reference Include="System.Data" />
+    <Reference Include="System.Net.Http" />
+    <Reference Include="System.Xml" />
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="LogClass.cs" />
+    <Compile Include="Program.cs" />
+    <Compile Include="Properties\AssemblyInfo.cs" />
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="App.config" />
+  </ItemGroup>
+  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+</Project>

Log-Function-Class/LogClass.cs

@@ -0,0 +1,167 @@
+using System;
+using System.Collections.Generic;
+using System.Diagnostics;
+using System.IO;
+using System.Linq;
+using System.Runtime.InteropServices;
+using System.Text;
+using System.Threading.Tasks;
+ 
+namespace LogClass
+{
+    public class LOG
+    {
+        static public StringBuilder _log = new StringBuilder();
+        static FileIO fio;
+        static public int min = 0;
+        static public int max = 10;
+        //
+        static LOG()
+        {
+            fio = new FileIO();
+            fio.OpenWriteFile("log.txt");
+        }
+        static public void error(object str)
+        {
+            log("Erorr:" + str, 10);
+        }
+        //static object syn = new object();
+        /// <summary>
+        /// log写入
+        /// </summary>
+        /// <param name="str"></param>
+        static public void log(object str)
+        {
+            log(str, 0);
+        }
+        static public void log(string str)
+        {
+            log(str, 0);
+        }
+        /// <summary>
+        /// log等级定制
+        /// </summary>
+        /// <param name="p"></param>
+        /// <param name="level"></param>
+        public static void log(object p, int level)
+        {
+            log(p.ToString(), level);
+        }
+
+        static public void log(string str, int level)
+        {
+            if(level < fio.LogLevel)
+            {
+                return;
+            }
+            if (str == null)
+            {
+                str = "null";
+            }
+            fio.WriteLine(DateTime.Now.ToLocalTime() + "->" + str + "\r\n");
+        }
+        /// <summary>
+        /// 修改Log的限制等级0日志最多，10最少
+        /// </summary>
+        /// <param name="Loglevel"></param>
+        public static void ChangeLogLevel(int Loglevel)
+        {
+            fio.LogLevel = Loglevel;
+        }
+
+
+
+        public static void LogSurPlusMemory()
+        {
+            PerformanceCounter ramCounter = new PerformanceCounter("Memory", "Available MBytes");
+            var ramAvailable = ramCounter.NextValue();
+            string ramAvaiableStr = string.Format("{0} MB", ramAvailable);
+            log($"剩余物理内存：{ramAvaiableStr}");
+        }
+    }
+
+    public class FileIO
+    {
+        private FileStream fsr;
+        private FileStream fsw;
+        private StreamWriter sw;
+        private StreamReader sr;
+        private string LogFloderPath = AppDomain.CurrentDomain.SetupInformation.ApplicationBase + "Log\\";
+        private double LogFileSize =128 * Math.Pow(1024, 3);
+        public int LogLevel = 0;
+        // 创建用于读取文件行的文件流和StreamWriter对象
+        public void OpenReadFile(string file)
+        {
+            if (!File.Exists(file))
+                File.Create(file).Close();
+            fsr = new FileStream(file, FileMode.OpenOrCreate, FileAccess.Read, FileShare.ReadWrite);
+            sr = new StreamReader(fsr);
+        }
+        public void Clear()
+        {
+            CloseWriteFile();
+        }
+        // 关闭读文件流
+        public void CloseReadFile()
+        {
+            if (fsr != null)
+                fsr.Close();
+        }
+        // 创建用于向文件中追加行的文件流和StreamWriter对象
+        public void OpenWriteFile(string file)
+        {
+            int i = 1;
+            while(true)
+            {
+                if (!Directory.Exists(LogFloderPath))//如果不存在就创建file文件夹
+                {
+                    Directory.CreateDirectory(LogFloderPath);
+                }
+                if (!File.Exists(LogFloderPath + file))  // 如果文件不存在，先创建这个文件
+                    File.Create(LogFloderPath + file).Close();
+                // 以追加模式打开这个文件
+                fsw = new FileStream(LogFloderPath + file, FileMode.Append, FileAccess.Write, FileShare.ReadWrite);
+                if (fsw.Length > LogFileSize)
+                {
+                    file = "log"+ i + ".txt";
+                    i++ ;
+                    continue;
+                }
+                break;
+            }
+            // 根据创建的FileStream对象来创建StreamWriter对象
+            sw = new StreamWriter(fsw);
+        }
+        // 关闭写文件流
+        public void CloseWriteFile()
+        {
+            if (fsw != null)
+                fsw.Close();
+        }
+        // 从文件中读取一行
+        public string ReadLine()
+        {
+            if (sr.EndOfStream)  // 如果文件流指针已经指向文件尾部，返回null
+                return null;
+            return sr.ReadLine();
+        }
+        // 向文件中追加一行字符串
+        public void WriteLine(string s)
+        {
+            if(fsw.Length > LogFileSize)
+            {
+                OpenWriteFile("log.txt");
+            }
+            lock (sw)
+            {
+                sw.WriteLine(s);
+                sw.Flush(); // 刷新写入缓冲区，使这一行对于读文件流可见
+            }
+        }
+        // 用于判断文件流指针是否位于文件尾部
+        public bool IsEof()
+        {
+            return sr.EndOfStream;
+        }
+    }
+}

Log-Function-Class/Program.cs

@@ -0,0 +1,15 @@
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+
+namespace Log_Function_Class
+{
+    class Program
+    {
+        static void Main(string[] args)
+        {
+        }
+    }
+}

Log-Function-Class/Properties/AssemblyInfo.cs

@@ -0,0 +1,36 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// 有关程序集的一般信息由以下
+// 控制。更改这些特性值可修改
+// 与程序集关联的信息。
+[assembly: AssemblyTitle("Log-Function-Class")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("Log-Function-Class")]
+[assembly: AssemblyCopyright("Copyright ©  2023")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// 将 ComVisible 设置为 false 会使此程序集中的类型
+//对 COM 组件不可见。如果需要从 COM 访问此程序集中的类型
+//请将此类型的 ComVisible 特性设置为 true。
+[assembly: ComVisible(false)]
+
+// 如果此项目向 COM 公开，则下列 GUID 用于类型库的 ID
+[assembly: Guid("ebddbafa-af32-421a-8a78-197c2ae09c79")]
+
+// 程序集的版本信息由下列四个值组成: 
+//
+//      主版本
+//      次版本
+//      生成号
+//      修订号
+//
+// 可以指定所有值，也可以使用以下所示的 "*" 预置版本号和修订号
+// 方法是按如下所示使用“*”: :
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]